RC Activated Relay Switch - Powered by Receiver
This version of our relay switching systems functions in the same way our relay only switch (VT-ARS) functions, however it does not have a separate power for an external battery and instead is wired to draw power via the RX itself. This is an ideal set up where adequate receiver battery power is available, and when the RX power voltage is 5.5V or under. ** Multiple screens/light kits can be switched on/off via the relay by the use of appropriate ganging cables
The Relay-Switch is designed to allow ON/OFF control of the RC-MFD Screens, as well as other devices like lights, glow plug drivers, motors, smoke systems, rocket igniters, solenoids, relays, etc. The P Relay-Switch is not proportional: it is either fully-ON or fully-OFF. The Relay-Switch performs the operation equivalent to a servo moving a mechanical switch back and forth.
The Relay-Switch can be used on any receiver channel, but is best placed on the gear channel or any other auxiliary channel that allows you to flip a 2-position switch on your transmitter to control the Relay-Switch . Adjust the endpoints of this channel to their full minimum and maximum positions.