VoyTech RC Activated Relay Switch -External Battery Power
The Relay-Switch is designed to allow ON/OFF control of the RC-MFD Screens, as well as other devices like lights, glow plug drivers, motors, smoke systems, rocket igniters, solenoids, relays, etc. The P Relay-Switch is not proportional: it is either fully-ON or fully-OFF. The Relay-Switch performs the operation equivalent to a servo moving a mechanical switch back and forth.
Using the Relay-Switch , you can safely power any load using power from the attached battery (2-6V) at up to 3A (up to 4A for short periods )Switching more current than recommended could overheat and damage the Relay-Switch . No current is drawn from the RX, and only the signal from the RX is provided to switch the Relay-Switch.
The Relay-Switch can be used on any receiver channel, but is best placed on the gear channel or any other auxiliary channel that allows you to flip a 2-position switch on your transmitter to control the Relay-Switch . Adjust the endpoints of this channel to their full minimum and maximum positions.
Download Manual
RC-MFD Relay Switch